Reflective Vehicle Marker Panels – Red/Yellow Diagonal Stripes

Product Specifications

Diagonal reflective marker panels in red and yellow for vehicle warning layouts, available as adhesive film or on aluminum backing.

Customization & Ordering

Contact Xingyuan with your required dimensions, color, quantity, application and destination country. We will confirm available options, sample arrangements, packaging and delivery.

For projects with specific performance requirements, confirm the material grade, installation conditions and supporting documentation before ordering.

Send Product Inquiry

Matched Stripe Directions and Panel Layout

These diagonal red and yellow markers can be specified as self-adhesive film or aluminum-backed panels for vehicle warning layouts. Start with the finished dimensions and the intended placement, then choose the backing suited to your installation. Opposing stripe directions can form a matched pair; specify the orientation of each piece on your drawing instead of relying only on a product photograph.

The mirrored pair shows how the diagonal bands meet across two adjacent pieces. The grouped-panel view gives an additional look at the reflective surface and color pattern. Neither photograph defines the supplied set quantity. Printed identification marks visible on a sample should be checked against documentation for the exact selected model whenever approval evidence is required.

Daylight and Illuminated Surface Reference

The comparison illustrates how the reflective face appears under different lighting. It is an appearance reference, not a measured brightness result or a guarantee of visibility at a stated distance. Reflective markings rely on incoming light; they do not replace vehicle lighting. Confirm the intended reflective grade and applicable product documentation when specifying the order.

Flexible Sticker Construction

The curled sample and backing close-up show the flexible self-adhesive option. Choose this format only after confirming compatibility with the intended surface. The aluminum-backed option is a separate rigid construction, with panel thickness and mounting details agreed before production. Do not infer adhesive type, hole spacing or hardware inclusion from the flexible-film photograph.

Specify the Order Clearly

Provide the required size and shape, quantity of individual pieces or pairs, stripe orientation and backing choice. Include a vehicle layout or dimensioned drawing if alignment with existing markings is important. For adhesive installation, use a suitable clean and dry substrate and confirm the selected construction for the application conditions. For plates, agree the fixing method separately. Packaging, labeling and any required supporting documents should be confirmed with the quotation for the exact supplied version.

Additional Horizontal and Vertical Pair Views

These additional product views show the diagonal bands in horizontal and vertical arrangements. Use the images to communicate the required stripe direction and pair layout. Confirm the finished dimensions for your mounting location; the apparent proportions in a photograph are not a substitute for a dimensioned drawing.

Illuminated View and Surface Close-Up

The illuminated pair and angled close-up provide more detail of the reflective face, stripe boundary and finished edges. Lighting affects the photographed appearance. Specify the required construction and supporting performance documentation separately.

Alternative Border Pattern Reference

The rectangular yellow-center design is an alternative marker format shown alongside diagonal strips. It is not automatically included in a diagonal-panel order. Identify the exact pattern, number of pieces, backing and dimensions in your inquiry so the quotation matches your selected marking layout.

Rigid Panel Construction, Placement and Packing

The following photographs add views of the rigid plate version, including the front and reverse faces, fixing holes and packed panels. Use them alongside the flexible-film references above to identify the construction required for your order. Plate thickness, dimensions and fixing details should be specified separately.

Panel Orientation and Fixing Positions

The paired views show opposing diagonal stripe directions and rounded panel corners. Visible holes are features of the photographed samples; confirm their number, diameter and spacing against a drawing before ordering. Provide the available mounting area and identify the left and right pieces in the intended installed orientation.

Front Face, Reverse and Surface Detail

The reverse view helps distinguish a rigid panel from adhesive-only marking film. The close-up shows the reflective surface texture and a printed identification mark. A mark visible in a product photograph does not establish approval for every available size or construction. Where a specified standard is required, request matching documentation for the exact product being quoted.

Vehicle Placement Reference

The truck illustration shows one possible rear placement. Final positioning depends on the vehicle, mounting space and applicable project requirements. Check clearance from lights, registration plates, hinges and moving components when planning the layout. The illustration is a positioning reference rather than an installation approval.

Packaging Details

The packing photographs show long panels arranged in cartons with protective wrapping. Confirm the number of individual panels or pairs per carton, protection method, labels and outer-carton dimensions for your shipment. Include the required quantity, destination and preferred backing in your inquiry so that the packing and quotation match the selected format.

Rear Marker Panels: Additional Finished-Product View

The fanned panels show the red-and-yellow face, rectangular edges and alternative stripe directions. Choose the required direction and finished dimensions for the intended mounting position. The number of panels shown is a display arrangement rather than a fixed pack quantity.

Confirm the Selected Panel Configuration

Specify whether the order is for individual panels or matched left/right pieces, together with the required substrate or adhesive backing. Confirm panel thickness, hole positions and packaging for the selected version. Reflective appearance depends on external light and viewing angle. Any required material grade, marking standard or supporting documentation should be included in the inquiry and agreed before ordering. Provide the dimensions, quantity and mounting application so the final configuration can be checked.