Product Specifications
Fluorescent yellow prismatic reflective sheeting for traffic-sign backgrounds and visibility markings.
| Color | Fluorescent yellow |
|---|---|
| Construction | Prismatic reflective sheeting |
| Backing | Self-adhesive |
| Roll Size | Confirm width and length |
| Applications | Traffic signs and reflective markings |
Fluorescent Yellow Rolls
The bright yellow face provides a distinctive daytime color. Confirm the exact color and grade with a sample.
Reflective Pattern Detail
The surface close-up illustrates the prismatic pattern under directional light. Actual appearance depends on lighting and viewing angle.
Roll and Face Material
The roll view shows the face material and its pattern. Specify dimensions and intended cutting or printing process.
Fluorescent Color and Prismatic Surface
This roll-form reflective sheeting combines a fluorescent yellow face with a visible prismatic pattern. The bright face is intended for conspicuous daytime markings, while the reflective structure returns incident light toward its source. It does not generate light by itself. The photographs show the same type of patterned surface in ordinary viewing conditions and under directional illumination.
Reflective Appearance from Another Angle
The additional roll view below shows how the pattern appears across a larger area when illuminated. Brightness varies with the positions of the observer and the light source, so a photograph should not be used as a measured reflectivity rating. Request a sample to evaluate the color, surface finish and appearance for your project.
Sign-Making and Converting Options
The self-adhesive backing supports conversion into reflective markings and sign components on suitable substrates. Choose the supplied format around the finished design rather than the roll photograph alone.
- Sign backgrounds: provide the panel dimensions, artwork and required reflective grade.
- Strips and smaller rolls: specify the strip width, length and quantity needed for your marking layout.
- Shaped components: send a dimensioned drawing or cutting file so that the shape, spacing and material suitability can be reviewed.
- Printed graphics: describe your proposed ink and process. Screen and UV printing compatibility should be checked on the actual material before a production run.
Application Planning
Check the intended surface before ordering. The panel should be sound, clean and compatible with the selected adhesive; rough, porous or contaminated surfaces can require a different solution. Trial a small piece on the actual substrate and review adhesion, appearance and any edge lifting before completing the job.
Plan the layout before removing the liner. Apply progressively with even pressure and avoid stretching the material or trapping air. For large sign faces, confirm the recommended application method and any joint or orientation requirements for the selected grade. Do not assume that all prismatic films use identical installation conditions.
Questions Before You Order
Is fluorescent yellow the same as glow-in-the-dark?
No. Fluorescent color affects the daytime appearance, while retroreflection relies on an external light source. This product is reflective sheeting, not a photoluminescent film.
Can the roll be cut to my dimensions?
Send the required width, length or finished shape with your quantity. Available cutting options and tolerances will be confirmed for the order.
Is it suitable for a regulated traffic sign?
Specify the applicable local standard and required material class. Confirm the selected grade and supporting documentation before ordering for a regulated installation.
Customization & Ordering
Include the required fluorescent yellow shade, roll or cut dimensions, quantity, intended substrate, printing process and delivery destination in your inquiry. A reference sample or color requirement helps avoid differences between screen appearance and the material you need. Roll dimensions, packing, sample availability and delivery details will be confirmed with the quotation.
