Product Specifications
White high-intensity prismatic reflective sheeting with self-adhesive backing for traffic-sign fabrication.
| Type | High-intensity prismatic reflective sheeting |
|---|---|
| Color | White |
| Backing | Self-adhesive |
| Listed Roll Size | 1.22 m × 45.7 m; confirm order details |
| Applications | Traffic-sign backgrounds and safety markings |
Self-Adhesive Reflective Roll
The roll view shows the reflective face and backing construction. Confirm compatibility with your mounting surface and converting process.
Prismatic Pattern Detail
The detail views show the surface pattern and reflective appearance. Confirm the performance specification and supporting documentation for your project.
White Prismatic Surface in Detail
The white face has a repeating prismatic pattern visible across the roll. This construction is intended for reflective sign backgrounds and safety markings where the material must work with incident light. The close-up below shows the roll edge and pattern across a larger section of the surface, helping you assess the appearance before requesting a sample.
Color and Lighting References
This product page is for the white version. The assortment photograph shows other color references that can be discussed separately when planning a matching sign or marking system. The comparison panel illustrates how the surface appearance changes under different lighting conditions. These photographs are visual references, not measured reflectivity results or proof of a particular certification.
Roll Protection and Packing
The illustrated packing arrangement includes roll-end supports, a dust-protection bag, wrapping film and a corrugated carton. These components help protect the roll during handling. The reference image lists a 1.22 m × 45.7 m roll and a 129 × 21.5 × 21.5 cm carton; confirm the packing arrangement and dimensions for the specification and quantity you order.
Choosing Material for Your Sign
- Reflective requirement: identify the required material class and applicable project standard.
- Panel and substrate: specify the panel dimensions, substrate and surface coating.
- Artwork: provide the print or cut layout, including any color overlays.
- Converting process: confirm cutting, printing and any edge-treatment requirements on a sample.
- Exposure: describe where the sign will be installed and the expected service conditions.
The high-intensity prismatic description identifies the listed product type. For a regulated road installation, verify the exact supplied grade and supporting documentation against the project specification before placing an order.
Application and Handling
The self-adhesive version is intended for application to a suitable prepared substrate. Remove contamination and ensure the surface is dry and sound. Check a small trial area before covering a complete panel. Plan the layout and any joints before exposing the adhesive, then apply progressively with consistent pressure and without stretching the film.
Keep the reflective face protected from scratches during cutting and handling. Confirm the recommended application conditions and printing compatibility for the selected material; do not assume that one process is suitable for every reflective-film construction.
Customization & Ordering
Send your required white shade or reference sample, roll or cut-piece dimensions, quantity, artwork and destination. Include the substrate, proposed printing method and required reflective standard. We will confirm available options, sample arrangements, packing and delivery for the agreed specification.
