Product Specifications
Engineering grade PMMA reflective film using glass-bead technology for printed signs and visibility markings. Supplied as self-adhesive roll material for custom conversion.
| Material | PMMA |
|---|---|
| Technology | Glass bead |
| Grade | Engineering |
| Adhesive | Pressure-sensitive |
| Format | Roll; custom cutting requirements on request |
Color Range
White, yellow, red and blue options are illustrated. Confirm the selected color and dimensions for your order.
Reflective Appearance
The material returns incident light toward its source. Viewing angle and illumination affect the observed brightness.
Sign Graphics and Markings
Specify the artwork, substrate and printing method so the material and finish can be matched to the intended project.
Glass-Bead or Prismatic Film?
This product uses a PMMA face and glass-bead reflective construction. To compare a prismatic option for printed graphics, see printable PMMA prismatic vinyl. Use our glass-bead versus microprismatic guide to prepare questions about the intended sign, viewing conditions and required technical data.
Customization & Ordering
Send a color-by-color quantity breakdown, roll or cut dimensions, sign drawing and receiving panel material. For printed work, include the printer and ink details. State the required performance standard and destination so the offered construction, supporting documents, sample arrangements and packing can be confirmed together.
Glass-Bead Finish and Color Selection
This engineering grade reflective film uses glass-bead technology with a PMMA face and pressure-sensitive adhesive. It is supplied as roll material for sign graphics and visibility markings. The additional photographs show the color range, the rolled surface and the liner so you can review more than a single front view before ordering.
Reflective film returns incident light toward its source. Its appearance changes with the lighting and viewing geometry, so photographs should be used as visual references rather than brightness measurements. Specify the required color and confirm a physical sample if the film must match an existing panel, brand color or project specification.Adhesive Backing and Roll Preparation
The opened red roll below shows the reflective face and protective release liner. Keep the liner on the adhesive until you are ready to position the film. Confirm the receiving panel material and surface coating when requesting a quotation; adhesion should be checked on the actual substrate before a larger installation.
Plan the required roll width, length and cutting layout in advance. For individual graphics or custom pieces, provide finished dimensions, quantity and a drawing where helpful. Cutting and printing requirements should be agreed for the exact film, and a trial conversion is recommended before full production. Printer, ink and any protective overlay must be compatible with the selected material.Color Range and Application References
The group photograph illustrates additional color options. Availability is confirmed for the requested quantity and format; the pictured colors are alternatives, not an assortment automatically included with each order.
The daytime and illuminated sign examples below demonstrate possible graphic layouts and applications. This listing supplies film rather than complete road signs, posts or mounting assemblies. Confirm the required grade and any relevant local sign standard before selecting material for a regulated traffic application. The term engineering grade alone does not establish compliance with every project specification.
Project Details to Include in Your Inquiry
- Color, roll dimensions or custom cut size and total quantity.
- Plain film or printed graphics, with artwork when available.
- Receiving surface and the intended sign or marking application.
- Required performance documentation and any applicable project standard.
- Packaging requirements and delivery destination.
